| NTN CRTD4802 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass needle roller and cage assembly:0.2 kg; Basic static load rating C0:170 kN; Limiting speed:4000 r/min; Basic dynamic load rating C:60.5 kN; Reference speed:3600 r/min; Fatigue load limit Pu:20 kN; U:27 mm; Ew:123 mm; Fw:115 mm; |
| 829744 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Initial grease fill:1672.65 g; Max. speed for Taconite seal:440 r/min; Mass pillow block:223 kg; Stabilizing ring:SR-38-32; Cap bolt recommended tightening torque:1735.4 N·m; Pa:52.5 kN; Cap bolt:1 1/8-7 UNC; R1:120.65 mm; L:711.2 mm; Ca:101.803 mm; Da:339.999 mm; R2:42.069 mm; P90°:249 kN; Housing:SSAFS 538; Cap bolt, SAE grade:8; da:177.8 mm; h:61.913 mm; P150°:136 kN; P180°:160 kN; |
| 52372 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da:215.001 mm; da:88.9 mm; P60°:185 kN; H:258.762 mm; R2:30.163 mm; H1:133.35 mm; N1:22.225 mm; H2:53.975 mm; A1:120.65 mm; J min.:336.55 mm; P90°:111 kN; PG:1/4 NPT; J max.:368.3 mm; P180°:81.4 kN; R1:79.375 mm; h:55.563 mm; Appropriate attachment bolt size G:0.75 in; J1:69.85 mm; Cap bolt, SAE grade:8; Housing:SAF 620; |
| FAG 545678 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Static Radial Load Rating Co:26500 N; Fillet Radius rb:0.30 mm; Fillet Radius ra:1.00 mm; D:62.0000 mm; B:28.00 mm; Basic Dynamic Radial Load Rating C:30200 N; d:35.000 mm; Grease Speed Rating n1:18000 rpm; Oil Speed Rating n2:29000 rpm; |
| 829976 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P60°:39.1 kN; Cap bolt:2 x 1/2-13 UNC; Initial grease fill:107.73 g; RG:1/8 NPT; R2:19.05 mm; P120°:14.2 kN; A2:190.5 mm; P180°:15.6 kN; H2:28.575 mm; H1:76.2 mm; Taconite seal:TER 20; J min.:196.85 mm; L:269.875 mm; Appropriate attachment bolt size G:0.625 in; H:147.637 mm; h:36.513 mm; ba:27.781 mm; PG:1/8 NPT; J max.:228.6 mm; Cap bolt recommended tightening torque:149.1 N·m; |
| FAG 527907 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Dimension A1:1.2813 in; Distance J:4.5938 in; Dimension A2:0.5313 in; Basic Static Radial Load Rating Co:2520 lbf; Dimension DA:3.0000 in; Weight W:2.00 lb; Height H:5.5625 in; Basic Dynamic Radial Load Rating:4380 lbf; Height T:1.6563 in; Shaft Diameter D:1 3/16 in; Dimension L:3.1250 in; Diameter N:0.5000 in; Insert Bearing IB:ZMaRC; |
| FAG 52201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fillet Radius ra:2.00 mm; D:215.0000 mm; B:80.00 mm; Basic Static Radial Load Rating Co:390000 N; Grease Speed Rating n1:5100 rpm; Basic Dynamic Radial Load Rating C:319000 N; d:120.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:7600 rpm; |
| 509392 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating n1:7500 rpm; Accessories:Shield & Seal & Snap; Basic Dynamic Radial Load Rating C:30700 N; Oil Speed Rating n2:10000 rpm; D:62.0000 mm; Sealed Speed Rating n3:7500 rpm; B:25.40 mm; Basic Static Radial Load Rating Co:20400 N; Fillet Radius ra:1.00 mm; d:25.000 mm; |
| SKF 353152 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | C1 max.:31 mm; h:185 mm; l7 min.:58 mm; G:M 45x3; dk:66 mm; Mass rod end:3.3 kg; Material constant KM:330; l2 max.:244 mm; d2 max.:114 mm; Basic dynamic load rating C:156 kN; r1 min.:0.6 mm; d:50 mm; Basic static load rating C0:245 kN; l1 min.:104 mm; B:35 mm; Specific dynamic load factor K:100 N/mm²; α:6 °; |
| 547482 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:390 kN; da min.:116 mm; D2:110 mm; D1 ≈:82 mm; Da max.:110 mm; r1,2 min.:1.5 mm; d1 ≈:140 mm; Mass bearing (including seat washer where applicable):3.2 kg; C:15 mm; Minimum load factor A:0.79; Reference speed:1600 r/min; d:80 mm; Limiting speed:2200 r/min; s:50 mm; Fatigue load limit Pu:13.7 kN; ra max.:1 mm; Basic dynamic load rating C:159 kN; D:140 mm; R:112 mm; |