| 519330Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | H2:69.85 mm; R1:115.888 mm; Mass pillow block:165 kg; Housing:SAFS 534; S:4.763 mm; P180°:133 kN; P60°:345 kN; da:147.637 mm; Initial grease fill:878.85 g; Stabilizing ring:SR-34-0; PG:1/4 NPT; Cap bolt, SAE grade:8; Da:309.999 mm; N1:28.575 mm; h:54.769 mm; RG:3/4 NPT; P90°:207 kN; Cap bolt recommended tightening torque:1220 N·m; Eye bolt:2 x 3/8-16 UNC; J1:107.95 mm; |
| FAG 509391 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da:85.001 mm; Stabilizing ring:SR-9-9; J min.:158.75 mm; R2:12.7 mm; Pa:3.09 kN; P150°:6.67 kN; RG:1/8 NPT; PG:1/8 NPT; N1:15.875 mm; Housing:SAF 509; Cap bolt recommended tightening torque:61 N·m; H1:57.15 mm; h:24.606 mm; R1:28.575 mm; L:209.55 mm; P180°:8.01 kN; A2:153.988 mm; da:36.513 mm; P60°:20.9 kN; S:2.778 mm; |
| 829264 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P90°:180 kN; L:511.175 mm; P150°:105 kN; Cap bolt recommended tightening torque:813.5 N·m; ba:64.294 mm; End plug (suffix Y):EPR 18; Initial grease fill:481.95 g; H1:152.4 mm; Max. speed for Taconite seal:520 r/min; Eye bolt:2 x 3/8-16 UNC; Pa:34 kN; R2:38.1 mm; PG:1/4 NPT; A2:260.35 mm; Stabilizing ring:2 x SR-0-24; h:44.45 mm; A1:149.225 mm; Taconite seal:TER 141; P60°:301 kN; |
| 545645Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:19.4 kN; Reference speed:17000 r/min; Limiting speed:19000 r/min; Fatigue load limit Pu:3.05 kN; Ew:29 mm; Basic static load rating C0:25.5 kN; U:16 mm; Fw:22 mm; Mass needle roller and cage assembly:0.016 kg; |
| FAG 545991 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | s1:30.2 mm; H:99 mm; H2:19 mm; Fatigue load limit Pu:0.8 kN; Basic static load rating C0:19 kN; R1:3.5 mm; N1:14.5 mm; L:174.5 mm; RG:1/4-28 UNF; J min.:125 mm; Recommended diameter for attachment bolts, mm G:12 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Hexagonal key size for grub screw N:3.969 mm; Mass bearing unit:2.05 kg; Recommended tightening torque for grub screw:6.5 N·m; |
| 2THR524012 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | F:91.5 mm; s max.:3.3 mm; B:22 mm; r3,4 min.:1 mm; db min.:94 mm; da max.:90 mm; ra max.:1 mm; r1,2 min.:1.1 mm; Reference speed:7000 r/min; D:125 mm; Limiting speed:7500 r/min; Basic dynamic load rating C:99 kN; d:80 mm; D1 ≈:109 mm; Calculation factor kr:0.1; da min.:86 mm; rb max.:1 mm; Fatigue load limit Pu:16.3 kN; Mass bearing:0.88 kg; Da max.:119 mm; |
| 526400Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Material constant KM:330; l4 max.:246 mm; Specific dynamic load factor K:100 N/mm²; l5 ≈:35 mm; Mass rod end:6.2 kg; B:44 mm; r1 min.:1 mm; α:6 °; w:70 mm; C1 max.:39 mm; Basic static load rating C0:400 kN; d4 ≈:82 mm; dk:80 mm; l3 min.:70 mm; G:M 52x3; l7 min.:70 mm; d2 max.:137 mm; d:60 mm; h1:175 mm; Basic dynamic load rating C:245 kN; |
| FAG 522837 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Dynamic Radial Load Rating C:41600 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6300 rpm; D:72.0000 mm; Oil Speed Rating n2:8500 rpm; d:30.000 mm; Accessories:Shield & Seal; Grease Speed Rating n1:6300 rpm; B:30.20 mm; Basic Static Radial Load Rating Co:29000 N; |
| NSK 230TFD4101 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Static Radial Load Rating Co:5300 N; Basic Dynamic Radial Load Rating C:7610 N; Grease Speed Rating n1:16000 rpm; D:42.0000 mm; Fillet Radius rb:0.15 mm; d:25.000 mm; B:9.00 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating n2:19000 rpm; |
| FAG 509392 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Specific static load factor K0:20 N/mm²; Tolerance housing:H7; Coefficient of friction µ max.:0.1; Mass bushing:0.88 kg; Tolerance shaft:h8; Specific dynamic load factor K:10 N/mm²; D:75 mm; B:90 mm; Permissible sliding velocity v min.:0.25 m/s; d:60 mm; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; |