| NSK 440TFD6601 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | RG:3/4 NPT; R1:115.888 mm; Ca:119.812 mm; Stabilizing ring:SR-34-0; Labyrinth ring:2 x LOR 139; P150°:77 kN; Initial grease fill:878.85 g; Housing:SAW 534; P180°:92.5 kN; PosiTrac Plus contact element:2 x B10724-130; Mass pillow block:132 kg; P60°:234 kN; ba:86.519 mm; J min.:492.125 mm; R2:37.306 mm; PG:1/4 NPT; N1:28.575 mm; A1:171.45 mm; J max.:549.275 mm; End plug (suffix Y):EPR 18; |
| 532584 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r3,4 min.:3.3 mm; B:150 mm; Thrust factor K:0.71; T:150 mm; h:11.7 mm; Comparative axial load rating CFa:387 kN; Basic static load rating C0:4750 kN; Design variant/feature:TDIS.2/N1; Calculation factor Y1:0.81; d1 ≈:428 mm; Calculation factor e:0.83; d:406.4 mm; Fatigue load limit Pu:375 kN; Basic dynamic load rating C:1963 kN; Calculation factor Y2:1.2; D1 ≈:474 mm; Mass bearing:120 kg; |
| FAG 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:923 kN; D:1180 mm; H:109 mm; Limiting speed:430 r/min; Reference speed:320 r/min; ra max.:4 mm; Minimum load factor A:440; Mass bearing (including seat washer where applicable):210 kg; r1,2 min.:5 mm; d:1000 mm; da min.:1102 mm; D1 ≈:1006 mm; Fatigue load limit Pu:102 kN; d1 ≈:1174 mm; Da max.:1078 mm; Basic static load rating C0:9150 kN; |
| NTN CRTD11002 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da:61.913 mm; A:73.025 mm; H2:41.275 mm; A1:91.281 mm; Basic dynamic load rating C:148 kN; B:85.725 mm; H:144.463 mm; H1:69.85 mm; d2:101.6 mm; Limiting speed:1100 r/min; Mass bearing unit:8.39 kg; J min.:209.55 mm; J max.:222.25 mm; S:0.794 mm; Attachment bolt diameter G:15.875 mm; s:31.75 mm; L:266.7 mm; |
| NSK 230TFD4101 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Static Radial Load Rating Co:5300 N; Basic Dynamic Radial Load Rating C:7610 N; Grease Speed Rating n1:16000 rpm; D:42.0000 mm; Fillet Radius rb:0.15 mm; d:25.000 mm; B:9.00 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating n2:19000 rpm; |
| 540295 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Static Radial Load Rating Co:1960 N; Grease Speed Rating Open/Shielded n1:28000 rpm; Oil Speed Rating Open/Shielded n2:34000 rpm; Basic Dynamic Radial Load Rating C:4620 N; Sealed Speed Rating n3:20000 rpm; Fillet Radius ra:0.64 mm; Accessories:Without Accessories; B:8.00 mm; d:9.000 mm; D:26.0000 mm; |
| NTN CRTD4802 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass needle roller and cage assembly:0.2 kg; Basic static load rating C0:170 kN; Limiting speed:4000 r/min; Basic dynamic load rating C:60.5 kN; Reference speed:3600 r/min; Fatigue load limit Pu:20 kN; U:27 mm; Ew:123 mm; Fw:115 mm; |
| SKF 350982C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | G:179.476 mm; Threads per inch:8; B1:163.728 mm; Mass adapter sleeve assembly:10 kg; Sleeve:S 136x6.15/16; d1:176.213 mm; B:28.042 mm; d:180 mm; B4:28.042 mm; Hydraulic nut:HMVC 36E; d3 max.:230.327 mm; |
| 547482 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:390 kN; da min.:116 mm; D2:110 mm; D1 ≈:82 mm; Da max.:110 mm; r1,2 min.:1.5 mm; d1 ≈:140 mm; Mass bearing (including seat washer where applicable):3.2 kg; C:15 mm; Minimum load factor A:0.79; Reference speed:1600 r/min; d:80 mm; Limiting speed:2200 r/min; s:50 mm; Fatigue load limit Pu:13.7 kN; ra max.:1 mm; Basic dynamic load rating C:159 kN; D:140 mm; R:112 mm; |
| 560910Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:19.5 kN; N4:4 mm; Db2:85 mm; RG:1/4-28 UNF; Da:93.7 mm; Housing material:Cast iron; Recommended diameter for attachment bolts, inch G:0.375 in; Db1:76 mm; d:25 mm; GN:1/4-28 SAE-LT; J7:24.5 mm; Recommended lock nut tightening angle α:95 °; B1:38 mm; Limiting speed:6300 r/min; J:83 mm; A1:13 mm; s1 ≈:22.5 mm; Appropriate spanner:HN 5-6; A:31 mm; Bearing:YSA 206-2FK; |